CJネルソン スラッシャーロープロ シングルフィン（9'3-9'9）サンダーボルトシルバー

The CJ Nelson Slasher Low Pro is for the longboarder who wants one board that can shred turns and hold a clean nose ride in the same session.

• The traditional logger who's ready to add real turning ability without giving up the noseriding feel they already love
• The progressive longboarder who wants tighter, more critical turns out of a log-style outline
• The noserider who wants a board that still draws a hard line off the tail when the wave allows
• The experienced longboarder building a one-board quiver who refuses to compromise on either end of the spectrum
• The surfer chasing pocket logging — staying in the steepest part of the wave and surfing it with both finesse and aggression

This is the board for surfers who want to redefine what a single fin can do.

The Slasher Low Pro is built for the heart of longboard surf — clean small-to-medium waves where you can step to the nose, pocket-shaped walls where you need to whip the tail and stay in the steep part, and stronger lined-up days where you want to draw a real performance carve. The concave nose generates lift in softer trim sections, the tail hip pivots tight in the pocket, and the lower performance rail with its modern tail edge holds an edge in faster, more critical waves. Hawaii's mix of mellow waist-high days and stronger overhead swells covers the exact range this board is designed to handle.

The Slasher Low Pro takes the involvement log and rebuilds it from the ground up. Concave runs through the nose to create lift and a defined pocket for traditional noserides — step forward and the board locks in. A pronounced hip in the back end shortens the rail line at the tail, which is what gives the board its pivot and whip when you snap a turn off the bottom or redirect in the pocket. From there, the rails drop into a lower, performance-style profile — thinner and more refined than a classic log rail — and finish in a modern hard edge through the tail. That hard edge is the design move that separates this board from a pure noserider: it releases water cleanly off the back of the board on turns, which is what makes carving and re-entries actually possible at this length.

Thunderbolt Black: Lightest and highest-performance Thunderbolt construction. EPS foam core with internal carbon fiber flex components, hand-laminated with 6oz carbon fiber and 2oz fiberglass on both deck and bottom. Quickest rebound rate in the Thunderbolt range — built for responsive, performance-driven longboarding.

Thunderbolt Silver: The most traditional-feeling Thunderbolt construction. Same EPS core and internal carbon flex system, finished with a heavier fiberglass layup (6oz + 6oz on the deck, 6oz + 4oz on the bottom). Tuned for classic glide, drop-knee turns, and noseriding — Thunderbolt's log-style construction.

Single-fin. Fins not included

サーフボードの配送

現在、貨物規定により、当店でご購入いただいたボードのみ発送可能です。

サーフボードは、取り扱い要件により、特定のプロトコルと料金で発送されます。

a. オアフ店での受け取り

ハワイ サーフボード配送料金

ネイバーアイランド：

➤ アラスカ 航空貨物

(全サイズボード)  - 通常2日で到着 (ボード発送の翌日午前7時より、アラスカ航空貨物空港にてお受け取りいただけます。)

正確なメールアドレスが登録されていることをご確認ください。アラスカ航空貨物からの受け取り通知はメールのみで送信され、電話での連絡は行われません。

保管料に関する注意点

• アラスカおよびハワイ諸州の空港、アラスカ航空およびハワイアン航空が運航する空港：週末および祝日を除く5日経過後に保管料が課金されます。最低料金：1日あたり40ドル
• アラスカおよびハワイ諸州以外の空港、アラスカ航空およびハワイアン航空が運航する空港：週末および祝日を除く72時間経過後に保管料が課金されます。最低料金：1日あたり40ドル

日本のサーフボード配送

➤ ドアツードア

アメリカ本土：サーフボード配送