ロスト ザ・リッパー (5'7 - 6'0) ライトスピードII

The Ripper fits a wide range of surfers who surf regularly and want more out of average conditions.

• The intermediate surfer who has the basics dialed and is ready to start surfing more aggressively off the tail
• The advanced surfer who wants a high-speed daily driver for typical town surf
• The experienced surfer who used to ride a Rad Ripper and wants the same DNA in a more modern shape
• The smaller or lighter surfer who needs a board that generates speed without relying on size or power in the waves
• The surfer who hits the water multiple times a week and wants a board that rewards tail pressure and rewards commitment

This is the board for surfers who want to show up to average conditions and actually have fun instead of just surviving them.

The Ripper is built for everyday surf — the kind of waves you see most of the time. It thrives in waist-high to overhead conditions, generating speed on the flatter sections and snapping hard in the pocket when the wave walls up. The low rocker and wide tail block are designed to get the most out of weaker, mushier surf, but the board doesn't fall apart when things get more powerful. For surfers in Hawaii, it handles the full range of what shows up on a typical day in town — from soft rolling lines to punchy, wedgy peaks — without needing ideal conditions to feel alive underfoot.

The Ripper's performance comes from a specific set of design decisions that work together. The overall rocker is kept low to build speed early and maintain momentum through flat sections. The entry nose is slightly pulled with a touch of added rocker so the board fits cleanly into tighter transitions without the beak nose of its predecessor. The deck is moderately rolled with lower, softer rails — a major departure from the flat deck and steep rails of the Rad Ripper — giving the board a more forgiving, contemporary feel underfoot. The tail is thinned out with a boxy block and a subtle bump/hip that replaces the old deep fluted wing, retaining plenty of small wave surface area while cleaning up the outline. The bottom runs a single concave through the center that transitions into a deep double concave/vee through the fins and out the tail, creating drive off the bottom and snappy directional response on the way out.

The result is a board that rewards rear foot pressure. The harder you drive off the tail, the more the Ripper responds — snapping, carving, and driving with real intent. Casual surfers will find it easy to use thanks to the built-in speed and smooth rail-to-rail transitions, but the board genuinely opens up for surfers who push it.

PU (Polyurethane): Traditional poly/polyester build. Heavier than epoxy, sits lower in the water for a more connected, engaged rail feel.

Lightspeed: EPS foam core with carbon fiber stringer and Innegra-infused fiberglass. Lightweight, lively, and adds approximately 2 liters of float over a comparable PU.

Lightspeed II: Updated version of Lightspeed. Refined layup for improved strength-to-weight ratio and flex response.

Double Dart: Full carbon fiber wrap with shortened rail laps and a 4oz fiberglass cover layer. The stiffest, most responsive construction — built for surfers who want maximum pop and feedback.

5-fin box. Rides as thruster or quad. Fins not included.

サーフボードの配送

現在、貨物規定により、当店でご購入いただいたボードのみ発送可能です。

サーフボードは、取り扱い要件により、特定のプロトコルと料金で発送されます。

a. オアフ店での受け取り

ハワイ サーフボード配送料金

ネイバーアイランド：

➤ アラスカ 航空貨物

(全サイズボード)  - 通常2日で到着 (ボード発送の翌日午前7時より、アラスカ航空貨物空港にてお受け取りいただけます。)

正確なメールアドレスが登録されていることをご確認ください。アラスカ航空貨物からの受け取り通知はメールのみで送信され、電話での連絡は行われません。

保管料に関する注意点

• アラスカおよびハワイ諸州の空港、アラスカ航空およびハワイアン航空が運航する空港：週末および祝日を除く5日経過後に保管料が課金されます。最低料金：1日あたり40ドル
• アラスカおよびハワイ諸州以外の空港、アラスカ航空およびハワイアン航空が運航する空港：週末および祝日を除く72時間経過後に保管料が課金されます。最低料金：1日あたり40ドル

日本のサーフボード配送

➤ ドアツードア

アメリカ本土：サーフボード配送