Donald Takayama In The Pink: A Classic Noserider Longboard Explained

Walk to the nose. Step back and turn.
Donald Takayama In The Pink

A classic Takayama noserider longboard with a wide, steady nose to stand on and a square tail that turns when you step back.

Shop the In The Pink
Donald Takayama In The Pink 9'6Donald Takayama In The Pink longboard in Thunderbolt Red constructionDonald Takayama In The Pink longboard in Thunderbolt Black construction with carbon fiber bottomDonald Takayama In The Pink 9'3
✓ Honolulu surf shop since 1996 ✓ Thunderbolt Red or Black construction ✓ 2+1 fins · 3 lengths

Quick answer: The Donald Takayama In The Pink is a classic Takayama noserider longboard: a long, wide board built so you can walk up and stand near the nose, then step back and turn. It is made for intermediate longboarders who catch waves and ride across them comfortably and now want more time on the nose.

It comes in 9'1", 9'3" and 9'6", all about 23 inches wide for a steady place to stand up front, in Thunderbolt Red or Thunderbolt Black construction.

What Is the In The Pink?

The In The Pink is a noserider that also turns like a performance longboard. Donald Takayama took his noserider designs and added a 2+1 fin setup and harder edges toward the tail, so one board lets you stand on the nose and still turn when you step back.

A noserider is a longboard built so you can walk to the front and ride with your toes near the tip. Hanging five means the toes of one foot are over the nose, and hanging ten means both feet.

To make that work, a noserider is wide and flat up front. A traditional log, the classic style of longboard, does that too but does not turn as easily. The In The Pink keeps the wide nose and still turns.

Grab your In The Pink

Donald Takayama In The Pink 9'3
Thunderbolt Red construction
A balanced, predictable flex for everyday surf and trade wind chop.
Shop the In The Pink
Donald Takayama In The Pink longboard in Thunderbolt Black construction with carbon fiber bottom
Thunderbolt Black construction
The lightest build with the quickest spring back, for strong turns.
Shop the In The Pink

Who Is the In The Pink For?

The In The Pink is built first for intermediate longboarders who want to start walking to the nose. You already catch waves and ride across them on your own.

Surfers moving up from beginner. If you are comfortable catching waves and want to learn to walk the board, the wide nose and middle give you a stable place to practice. It is not a first board, so tell us what you ride now and we will help you decide.

The one-board longboarder. The flat nose catches small waves, and the tail holds when the waves get bigger, so one board covers both kinds of day.

Experienced longboarders who want nose rides and turns in the same session. The 60/40 rails and square tail let you turn after you walk back, so you are not stuck riding straight.

Surfers coming back to longboarding. The classic noserider shape feels familiar right away, and the Thunderbolt flex gives your turns a livelier finish.

How Is the In The Pink Designed?

It noserides and still turns because of a few design choices working together.

  • Wide, parallel outline: the outline is the shape seen from above. The edges run nearly straight through the nose and middle, so the board stays wide where you stand and paddles and glides easily.
  • Flat nose rocker: rocker is the curve from nose to tail. A flat nose gets the board moving early and keeps its speed when the wave goes soft, which gives you time to walk.
  • Nose concave: a shallow scoop under the nose that helps hold the board steady while you stand on the tip.
  • 60/40 rails into a square tail: rails are the edges of the board. They get harder toward a square tail, giving it enough grip to hold a turn and enough release to come around.

How Does the In The Pink Surf?

Up front it rides like a noserider, and from the back it rides like a performance longboard. A typical wave goes like this: catch it early, angle across, and walk up while the wave stays smooth and open in front of you.

Then step back and turn to set up for the next part of the wave. The square tail and 2+1 fins give you something to push against, so you can turn back toward the steeper part of the wave.

That helps your surfing. You catch more waves, you get more practice on the nose, and you learn to link the nose ride and the turn.

What Waves Does the In The Pink Handle?

It covers small, soft days, clean peeling walls and days with real size and power. On small days the flat nose and wide front get it into waves early and keep it moving.

On clean days with a wave that breaks steadily along its length, it sets up for long, steady nose rides. When the surf has power, it holds its line close to where the wave is breaking.

That range fits Oahu, where the same longboard can see knee-high waves one day and a fast wall the next. One caution: the flat nose can dig on steep, late takeoffs, so catch the wave before it stands up tall.

What Sizes Does the In The Pink Come In?

The In The Pink comes in 9'1", 9'3" and 9'6", each in Thunderbolt Red or Thunderbolt Black construction.

In The Pink dimensions
Length Width Thickness Volume Fins
9'1" 23" 3" 71.5 L 2+1
9'3" 23" 3" 73 L 2+1
9'6" 23 1/16" 3 1/16" 75 L 2+1

Volume, measured in liters, is how much float the board has. Each step up in length adds 1.5 to 2 liters, so the 9'6" paddles and glides easiest and the 9'1" is the easiest to swing around.

Width and thickness stay nearly the same across all three, so the wide, steady platform for noseriding is there whichever length you pick.

We do not pick a size by weight alone. Send us your height, weight, current board and the waves you ride most, and we will tell you which length we would ride in your shoes.

How Does the Fin Setup Work?

The In The Pink has a 2+1 fin setup: one center fin box plus two small side fin boxes. You can ride it as a single fin or as a 2+1.

As a single fin it has the most glide and a smooth, drawn out feel, which suits clean, smaller days on the nose. As a 2+1 it gets more drive, meaning push and speed out of a turn, when the waves have more size.

Fins are sold separately. Shop our center fins and longboard side fins, or bring the board in and we will help you set it up.

Who Was Donald Takayama?

Donald Takayama (1943 to 2012) grew up surfing in Waikiki. As a teenager he moved to California to work for the shaper Dale Velzy, and he went on to shape for Jacobs, Bing and Weber.

He founded Hawaiian Pro Designs, and when longboarding came back in the late 1980s and 1990s, his noseriders were part of it. The In The Pink carries those noserider ideas into a board that also turns.

Read more in Who Was Donald Takayama?.

How Is the In The Pink Built?

Thunderbolt construction builds a tuned flex into the board. It bends and twists as you lean into a turn and springs back as you come out of it. That spring back is called rebound, and it gives the turn a livelier finish.

Each board starts with an EPS foam core, a light foam, laminated by hand in epoxy resin. There is no wooden stringer, the strip of wood down the middle of most boards. Flex parts inside the board control how it bends, twists and springs back.

Thunderbolt Red and Thunderbolt Black are two constructions, not two colors.

In The Pink: Thunderbolt Red vs Thunderbolt Black
Thunderbolt Red construction Thunderbolt Black construction
Inside Carbon fiber flex parts Flex parts set up for a quicker spring back
Carbon fiber outer skin No Yes
Rebound Medium and predictable The quickest of the Thunderbolt builds
Weight and feel A little heavier, so it feels settled in wind chop The lightest Thunderbolt build
Finish Gloss Gloss deck, matte bottom
Our starting point Most surfers and changing conditions Heavier riders, strong turns, powerful surf

Pick Thunderbolt Red construction for a balanced, predictable feel in a wide range of waves. Pick Thunderbolt Black construction if you surf powerful waves, push hard through your turns and want the quickest spring back.

See every Takayama model built this way in our Donald Takayama Thunderbolt collection.

How Do I Care for It and Fix a Ding?

Use epoxy repair materials only, never polyester resin. Polyester resin can damage the EPS foam core.

Let the board dry fully before a repair. For anything deeper than a surface scratch, bring it to us or send us a clear photo and we will help you decide what it needs.

You can also watch our short In The Pink video on YouTube.

Ready to Ride One?

If you want more time on the nose and still want to turn, the In The Pink is built for that. Send us your height, weight, current board and usual waves, and we will help you pick the length, build and fins. Come by the shop to see both builds in person.

Shop the Donald Takayama In The Pink

Hawaiian South Shore
320 Ward Ave, Suite #111, Honolulu, HI 96814
Call or text (808) 597-9055
sales@hawaiiansouthshore.com

Frequently Asked Questions

Is the In The Pink a noserider or a performance longboard?

It is a noserider first that also turns well. The wide nose and flat nose rocker make it steady up front, and the 60/40 rails and square tail let it turn when you step back.

Is the In The Pink good for beginners?

Not as a first board. It is built for intermediate surfers, and it suits a surfer moving up from beginner once you can catch waves on your own and ride across them comfortably.

What size In The Pink should I ride?

It comes in 9'1", 9'3" and 9'6", all about 23 inches wide. The longer lengths paddle and glide easier, and the 9'1" is the easiest to swing around. Send us your height, weight, current board and usual waves and we will help you pick.

Should I ride it as a single fin or a 2+1?

Both work. A single fin gives the most glide for clean, smaller days on the nose, and a 2+1 adds drive and quicker turns when the waves have more size.

Is Thunderbolt Red a color?

No, Thunderbolt Red and Thunderbolt Black are two constructions, not colors. Red has carbon fiber flex parts inside and a medium, predictable rebound. Black has a carbon fiber outer skin and is the lightest build with the quickest rebound.

How do I fix a ding on a Thunderbolt In The Pink?

Use epoxy repair materials only, never polyester resin, because polyester resin can damage the EPS foam core. Let the board dry fully, and bring it to us or send us a clear photo.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.